Origami window dressing

 My window has been looking pretty empty after I took my Christmas decorations down. It's not totally bare because 3 of my orchids happen to be in bloom. I have a total of 5 orchid plants. I did not buy any of these plants. They were all gifts. The only indoor plants I buy are cacti because everything else dies. But apparently not orchids. I've even chucked them outside because I really did not want to deal with them, but they relentlessly survived. I feed them once a year if they are lucky and I water them once a week (which I'm told is plenty) and they just keep giving. My husband says I must be growing old because I have a knack for orchids and only old people grow orchids! But he's just joking, of course.

Being just the beginning of February I felt it was too early for spring and flowers. God forbid, it is still snowing outside. I thought we need a bit of peace and goodwill and someone really needs to use up all that origami paper that has accumulated over the years. I don't know if anyone else has this problem, but when I see cheap origami paper I just have to buy it. I have no idea why. I also buy origami books. I have one math book which describes the geometry of origami. I have another in which the origami insects are so complicated that I have never managed to complete a single one. I actually know why. It says you should use the highest quality paper to prevent tearing. And cheapo me does not have any high quality paper and is not going to invest in any. This is how I came up with the idea to make strings of origami cranes to dress my window. 

All you need to make these strings are:

1. Origami paper
2. Fishing nylon, beading nylon or any other thread
3. A needle with a head big enough for the thread to fit through
4. One weight per string 
5. Blue tac, a glue gun 

First of all make the cranes. I will not go through how to do this because there are hundreds of instructions out there. If you are like me and like an old fashioned paper instruction try this one: https://en.wikipedia.org/wiki/Orizuru (I'm trying to be neutral here!). If you prefer a video ... well you know exactly what to do. Some cranes are slightly easier than others. The one on Wikipedia is the easiest type. If you don't know the origami notation then probably a video is a better option for you. 

I used multicoloured origami paper so I lay them out on the table and swapped them around until I was happy with the colour combination. I mean, I wasn't totally happy with my combinations, but I really didn't want to make anymore cranes so I made do with what I had! 

Measure how much string you need and add on about 30 cm so you have some extra to tie knots and adjust the length. Start with the bottom most crane. Thread the string into your needle, gently press your crane flat, and then pass the needle through the hole in the bottom and out through the middle of the body. By pressing the crane flat it is easier to see where the middle is and it is less likely that the paper tears.  Continue threading your cranes until you have the desired number, which in my case was 4. 

You'll need a weight at the bottom of the string because the cranes don't weigh enough to keep tension in the string. You can use anything for the weight. I happened to find these "things" in my basement. I bought them on sale at a crafts store because they were pretty (and on SALE). I'm sure I'm not alone on this one. My husband keeps me out of craft stores because I can't help myself. And if I do wander in because I really, really need something (like a pot of glue) I always head over to the sale rack, and I ALWAYS find something that has my name on it. I remember when I picked these up. I was standing outside with my husband while my kids were inside buying stuff. Then my husband popped into the bakery opposite to pick up some bread. One of my kids popped their head out of the store just then (I'm sure they noticed that I was alone) and asked me if I could come and look at something they wanted to buy. Unable to resist I took that bold step into the store, I looked at their potential purchase and then was told by my eldest "hey mama, you know they have some nice stuff on the sale rack". I gave her a scolding, told her that she would be in trouble with her father (as would I be), and all too willingly headed to the back of the store. My kids had a field day of it, picking things up and enticing me with them. "Mama, wouldn't this look good", "Oh mama, look how cheap this is. Are you sure you can't use it?", "This looks really, really cute". They got so much fun out of it and I got a whole heap of stuff that was so cute, so cheap, and I so did not need. Including these metal lattice hanger things. When we came out of the store my husband just shook his head in despair and I blamed it all on the kids 😉

Now string your weight on to the bottom and secure it with a double knot.

My window is above my kitchen sink and I have to climb on a stool and lean over the sink and kitchen counter to get to the top. So it's not very easy to adjust things in situ. So I hung my strands onto a curtain in my living room using a safety pin. Then I figured out how to space the cranes. I used a tiny piece of blue tac to hold the cranes in place. A tiny piece right at the bottom. Because I used blue tac I was able to adjust the heights so that they matched. It is also much easier to adjust if you find it doesn't work when you move it to where it should be. You could of course use a glue gun to place a small bead of hot glue at the bottom of the crane. But you then have to be sure that you have the right place. If you don't have blue tac you can use any other type of poster tac or you could use plasticine, clay or play doh (although the play doh may not work quite as well). If you want to be really fancy you can string a bead on before you string on a crane and tie the bead into place. The problem with this is of course that it would be really hard to change it later and you would have to tie that knot before you put the next crane onto the string. 

Then you are done. All I had to do was to move the cranes over to my kitchen window! 

If you are wondering how I attached them to my window frame I used some self adhesive ceiling hooks. I'm so happy with these hooks that I bought a heap more so that I could dress all my windows for Christmas. Needless to say the hooks are still in a drawer and the windows were completely naked! Well maybe I'll get round to it next Christmas.  

Pumpkin fairy lights

 I wanted to make pumpkin fairy lights to light up the crochet witch that my daughter made for me, but I could not find anything I liked anywhere. I was not about to buy some lights. I'm not sure why, but that somehow didn't seem right. After raiding my craft drawers I only had to buy some paper!

You will need:

A string of 20 fairy lights 

A hole punch

20 Brads [for some reason called "sample bag clips"(Musterbeutelklammern) in Germany]

Brown play-doh or plasticine or similar substance

1 sheet 50,5 * 70 cm Orange transparent paper (Transparent-Extrastark)

Scissors

Ruler

Cellotape

Pen/pencil (maybe!)

Method:

First make a trial strip. You need to do this because the bulb has to fit through the hole that you punch. Cut a 1.5 cm by 10 cm strip of orange paper and punch a hole into the end. Check if the bulb completely passes through. I found that the wires coming out of the bulb are wider than the bulb itself so I had to squeeze them a bit to get them through the hole. If your bulb does not fit through you may have to find a hole punch with a larger hole or a smaller bulb. If you have to buy the string of fairy lights and have a hole punch at home make a hole in a thick piece of paper and take it to the store with you so you can see if the bulb fits through it. Don't forget it you make a larger hole your strips will have to be wider. Adjust accordingly. Also don't forget if your bulb goes through too easily it will also come out easily. Mine just happened to be perfect. Once I had the paper in it did not just slip out. 

Once you have the correct material cut 11 strips of orange paper per pumpkin (1.5 by 10 cm). It is not so important that the strips are exactly the same width, but it is important that they are exactly the same length (that is, for one pumpkin). Stack them and trim them if necessary.

Punch a hole in the bottom and in the top. If you have a single hole punch things will be easier, but if you don't you can use a regular hole punch. I have a single one somewhere in the house but no one seems to know where it is! When using a two hole punch you'll need to take the back off the hole punch so you can see where you are punching. Make a small dot at the place you want to be the center of the circle. Place the strip into the hole punch so that you can see the dot and then punch! You can stack a few together so things go quicker. In fact if you can punch all 11 in one go then it will be much easier for you to pass the bulb and the brad through the hole. It worked with my standard hole punch so I think it should work with most.

Pass the bulb through 11 strips of paper. The side you want to be on the outside is facing my hand in the picture. The side on the top will be inside the pumpkin. In the photo I passed one strip through, but later on I passed all 11 at the same time and to get it through the last bit I bent the paper a bit. This seemed to get it through.

And then pass a brad through the hole on the other side as shown in the picture. 

Next distribute the strips to form what looks like a Chinese lantern (at least thats what my kids think it looks like).  You may need to loosed the brad to make it easier to distribute the layers. It's easy enough to tighten it later. Squeeze it a bit to make it look more like a pumpkin. 

Take a small blob of play-doh and form the stem. You may need to hold the wires together. My wires insisted on separating so I put a small piece of tape around them to hold them together. 

And voila!! 

PS. You may need to wait for your play-doh to dry before hanging your lanterns.